Equipment guide · buying a set

Commercial washing machine and dryer: buying them as a matched pair

A commercial washing machine and dryer only work well together if the dryer can keep up with what the washer hands it, so it pays to choose them as one set rather than two separate purchases. This guide covers how to balance the pair, stacked units versus side-by-side machines versus one washer with two dryers, the space and services the set needs, and what to ask a supplier.

  • How to balance dryer against washer
  • Stacked, side by side or one washer with two dryers
  • Space and services for the whole set
  • ICO registered ZA810991
  • UK company 11135452
  • Rules checked 19 November 2026
Free quotes

Get quotes for a commercial washer and dryer

Free, no obligation. Three quick steps.

Your laundry
Options
Your details

ICO registered ZA810991 No obligation For businesses

Commercial washing machine and dryer: key points
  • Treat the washer and dryer as one system: the slower of the two sets how much laundry you finish in a day, so a fast washer paired with a slow dryer just builds a pile of wet laundry.
  • Three things decide the balance: the load each machine takes, how much water the washer's spin leaves in the laundry, and how long the dryer needs for that load.
  • Common layouts are a stacked washer-dryer (one footprint), a side-by-side pair, or one washer feeding two dryers. Which suits you depends on volume, space and what happens when one machine is out of action.
  • Plan space and services for both machines at once: water, backflow protection and drainage for the washer; power or gas, plus venting or a condensate drain, for the dryer; and an electrical supply that can run both together.
  • Gas dryers need a competent installer; HSE says that in workplaces such as shops, restaurants, schools and hospitals that means a Gas Safe registered engineer qualified to do the work.
  • Buying both from one supplier gives you one installation and one service contact; buying separately can work, but someone still has to check that the two match.

Why choose a commercial washing machine and dryer together?

Short answer

Because laundry goes straight from one into the other. If the dryer is too small, too slow or gets wetter laundry than it was sized for, washed loads queue up and the washer's speed is wasted. Choosing both at once lets you size, place and connect them as one working set.

The slower machine sets the pace

Daily output is limited by whichever machine takes longer per load.

The washer affects the dryer

Water the spin leaves behind has to be removed by heat in the dryer, so a new washer can change drying time.

Shared space and services

Both machines share the floor, the route in, the electrical supply and the walls for drains and ducts.

One problem, one call

Slow drying can start in either machine. One installer or service contract avoids arguments over whose fault it is.

This page is about matching the two. For the details of each machine on its own, see our guides to commercial washing machines and commercial tumble dryers.

How do you match a commercial dryer to a commercial washer?

Short answer

Match three things: capacity (a full washer load with room to tumble), extraction (how wet the washer leaves the load) and cycle time (the dryer should finish a load in no more time than the washer takes to produce the next). Ask suppliers for figures for your own items.

Worked example (ASSUMED figures)

These figures are made up to show the arithmetic, not real times for any machine: use the times suppliers give you for your own loads. Assume an 8-hour laundry day (480 minutes), a washer that takes 50 minutes a load including loading, and laundry ready to wash from the start. The washer finishes its ninth load at 450 minutes.

Worked example using ASSUMED times, not real machine figures
Set-up (assumed)Dryer time per loadLast load dry atWhat it shows
One washer, one dryer60 minutes590 minutes (1 hour 50 minutes after the 8-hour day ends)The dryer falls 10 minutes further behind with every load; wet laundry piles up
One washer, two dryers60 minutes each510 minutes (30 minutes after the day ends)Each dryer has spare time; the only overrun is drying the final load
Harder-spinning washer, one dryer50 minutes (assumed shorter because less water is left in the load)500 minutes (20 minutes after the day ends)Dryer keeps pace with the washer; no queue builds up

The pattern is what matters: when the dryer is slower per load, the gap grows with every load. To size the whole laundry from your kilos a day, use our laundry capacity calculator.

Stacked washer-dryer, side-by-side pair or one washer with two dryers?

Short answer

A stacked unit saves floor space; a side-by-side pair gives a wider choice of sizes and keeps each machine easy to reach; one washer with two dryers suits sites where drying is the bottleneck. Decide on volume, space, who will load the machines and what happens when one is out of action.

General guide; suppliers will confirm which layouts their machines allow
LayoutSuitsWatch forAsk
Stacked washer-dryerSmall rooms, cupboards and lower daily volumes where floor space is shortCeiling height and vent route from the upper dryer; reach for loading and cleaning the top machine; sizes on offer may be limitedIs it designed and approved to be stacked? Can each half be repaired or replaced on its own?
Side-by-side pairMost sites with room for two footprintsFloor width for both machines plus service clearance; door swings that clash; a long carry if they end up apartCan the doors be hinged to open towards each other? What clearance does each machine need?
One washer, two dryersSites where drying takes longer than washing, or bulky itemsMore floor space, more venting or condensate drainage, more electrical or gas capacityCan both dryers run at full power at the same time on your supply?
Only stack machines that the manufacturer has designed and approved to be stacked, using the approved stacking kit. Never put a dryer on top of a washer that isn't made for it.

How much space does a commercial washer and dryer need?

Short answer

The footprint of both machines, plus the clearances each manufacturer specifies at the sides and back, plus working space in front to open doors, stand, and park a trolley. A stacked unit needs one footprint but more height and a vent route from the top. Measure the route in as well as the room.

What services does a commercial washer and dryer pair need?

Short answer

The washer needs water with backflow protection, drainage for a fast discharge, and power. The dryer needs power or gas, plus ducting to outside or a condensate drain. The electrical supply must run both at once.

What each machine needs, and what to check for the set
ServiceWasherDryerCheck for the pair
ElectricityMotor, controls, any water heatingHeating (if electric), motor, controlsCan the supply run both at full load together? Single or three phase?
WaterCold, sometimes hotNoneBackflow protection: every water system "shall contain an adequate device or devices for preventing backflow" (Water Fittings Regulations, Schedule 2, paragraph 15)
DrainageFast, hot dischargeHeat pump dryers need a drain for condensed waterTrade effluent into a public sewer needs the sewerage undertaker's consent (Water Industry Act 1991, section 118); ask your water company
GasNoneGas dryers onlySupply, flue and air, fitted by a competent installer (below)
VentingNoneVented dryers: duct to outside as the manufacturer specifiesA duct route clear of the washer's services; fresh air into the room

Gas work: "No person shall carry out any work in relation to a gas fitting or gas storage vessel unless he is competent to do so" (Gas Safety Regulations 1998, regulation 3). HSE says that in workplaces such as shops, restaurants, schools and hospitals this means a Gas Safe registered engineer who is qualified to do the work, and that rooms with gas appliances should have adequate ventilation (HSE). Employers must keep gas appliances, pipework and flues at their workplace "maintained in a safe condition so as to prevent risk of injury to any person" (regulation 35).

Replacing one half of a pair? Ask the installer to check the supply, drain and vent suit the new combination, not just the new machine.
Ready to compare quotes?Tell us about your laundry once and a specialist UK commercial laundry supplier will come back with options to buy, lease or rent.
Get quotes

How should laundry flow through a washer and dryer set?

Short answer

In one direction: sorted, washed, moved a short distance into the dryer, cooled, then folded and stored away from the dirty side. Place the pair so the wet transfer is short.

  1. SortBy item and soil level, so each wash load is also a sensible drying load.
  2. WashLoad to the washer's rated capacity, not beyond it, on the right programme.
  3. TransferWet laundry is heavy. Keep the dryer beside the washer, doors opening towards each other.
  4. DryUse the dryer's programme for that item; clean the lint filter as often as the manufacturer says.
  5. Cool and unloadLet the cool-down phase finish before unloading, then take laundry to a clean area to fold.
  6. StoreClean, dry and away from dirty laundry. Care homes: HTM 01-04 says items should go through a drying process where compatible, then be stored in a clean area above floor level and not in the laundry area.

Source for care homes: HTM 01-04 Social care volume, 6.12. See our care home laundry equipment guide for layout and segregation.

Should you buy the washer and dryer from one supplier?

Short answer

Often it's simpler: one survey, one installation, one firm responsible for the match, one service contract. Buying separately suits keeping a machine that still works, but you check the match yourself.

One supplier for both

  • One survey covering both machines and services
  • One firm accountable for the dryer keeping up
  • One service contract and one number to call
  • The set can go on one lease or rental agreement

Separate suppliers

  • Lets you keep a good existing machine
  • Someone still has to check spin, load size and dryer time match
  • Two service contacts; faults between the machines can be argued over
  • Different warranty and contract end dates

Whichever route you take, employers must keep work equipment "maintained in an efficient state, in efficient working order and in good repair", and keep any maintenance log up to date (PUWER regulation 5). Include the dryer and its lint in your fire risk assessment: in England and Wales the responsible person "must make a suitable and sufficient assessment of the risks" (Fire Safety Order 2005, article 9). For paying monthly, see laundry equipment leasing; for servicing, our repair and servicing guide.

What should you ask before buying a commercial washer and dryer?

Short answer

Ask how the supplier matched the dryer to the washer, using which load, spin and cycle times; what layout and space they need; what services must change; and who services both machines and how quickly.

Get quotes for a matched commercial washer and dryer

Tell us about your laundry once. We pass it to a specialist UK commercial laundry equipment supplier, who will:

  • Talk through your laundry: what you wash, how much, the space you have, and your water, drainage, power and any gas.
  • Quote in writing to buy, lease or on a monthly plan, with delivery, installation and servicing shown.
  • Explain the service cover: response times, what's included, and who to call when a machine stops.

For businesses and organisations. Prefer email? Write to hello@commerciallaundryhub.co.uk with your business type, size and the machines you need.

Free quotes

Tell us about your laundry

Three quick steps. Free and no obligation.

Your laundry
Options
Your details

ICO registered ZA810991 No obligation For businesses

Commercial washing machine and dryer: frequently asked questions

Should a commercial dryer be bigger than the washer?

It can be. Wet laundry needs room to tumble, and the dryer has to keep pace with the washer. Ask suppliers which dryer size they would pair with the washer for your items, and what spin and drying time that assumes.

Can I stack a commercial dryer on top of a commercial washing machine?

Only if the machines are designed and approved by the manufacturer to be stacked, using the approved kit. Some commercial machines are made as stacked washer-dryer units.

Is a stacked washer-dryer or two separate machines better?

A stacked unit saves floor space. Two separate machines give more choice of sizes, are easier to load and reach, and let you add a second dryer later. It depends on your room and volume.

Why does my dryer take longer than my washer?

Drying time depends on how much water is left in the load, the item, how full the drum is and the dryer itself. A slow spin, overloading or a blocked lint filter or duct can all make drying slower.

Does washer spin speed affect drying time?

Yes. A harder spin leaves less water in the laundry, and less water means less for the dryer to remove. Ask suppliers to compare how wet each washer leaves your typical load.

Do I need one dryer or two for one washer?

If the dryer takes longer per load than the washer, washed laundry will queue. Compare the two cycle times for your loads; a second dryer, or a bigger or faster one, closes the gap.

What power does a commercial washer and dryer need?

It depends on the machines. Check that your supply can run both at full load at the same time, and tell suppliers whether you have single or three phase, and gas if you want a gas dryer.

Can I use a gas dryer with an electric washer?

Yes. The two don't need the same fuel, but the gas dryer needs a gas supply, flue and air supply, fitted by a competent installer; HSE says in workplaces such as shops, restaurants, schools and hospitals that means a Gas Safe registered engineer qualified for the work.

Is it better to buy a washer and dryer from the same supplier?

It's usually simpler: one survey, one installation, one service contract and one firm responsible for the match. Buying separately can work if you check the match yourself.

How do I work out how many washers and dryers I need?

Start from your kilos of laundry a day, your laundry hours and the cycle times of each machine. Our laundry capacity calculator works out washers and dryers separately from the figures you enter.

Sources

We checked the facts on this page against these sources on 19 November 2026. Guidance changes: check the current version before you rely on it.

  1. Water Supply (Water Fittings) Regulations 1999, Schedule 2, paragraph 15: backflow prevention (legislation.gov.uk)
  2. Water Industry Act 1991, section 118: consent for discharge of trade effluent into a public sewer (legislation.gov.uk)
  3. Gas Safety (Installation and Use) Regulations 1998, regulation 3: qualification and supervision (legislation.gov.uk)
  4. Gas safety for employers (HSE)
  5. Gas Safety (Installation and Use) Regulations 1998, regulation 35: duties of employers (legislation.gov.uk)
  6. Provision and Use of Work Equipment Regulations 1998, regulation 5: maintenance (legislation.gov.uk)
  7. Regulatory Reform (Fire Safety) Order 2005, article 9: risk assessment (legislation.gov.uk)
  8. HTM 01-04: Social care volume (NHS England, PDF)