Equipment guide

Commercial tumble dryers: electric, gas or heat pump?

Commercial tumble dryers are often the slowest step in a business laundry, so choosing the right heating type and size decides whether your laundry keeps up. This guide compares electric, gas and heat pump dryers, explains venting and sizing against your washers, and covers the safety checks that matter.

  • Electric, gas and heat pump compared
  • Sized against your washers' output
  • Gas, venting and lint safety
  • ICO registered ZA810991
  • UK company 11135452
  • Rules checked 18 November 2026
Free quotes

Get quotes for commercial tumble dryers

Free, no obligation. Three quick steps.

Your laundry
Options
Your details

ICO registered ZA810991 No obligation For businesses

Commercial tumble dryers: key points
  • Drying usually takes longer than washing, so dryers often need more capacity than washers to keep up. Size them on their own cycle time.
  • Three main heating types: electric (simple to install, needs a big electrical supply), gas (needs a gas supply, flue or vent, and a Gas Safe registered engineer or competent person, as HSE explains) and heat pump (recirculates warm air; ask about cycle times and condensate drainage).
  • Vented dryers need ducting to outside, sized and routed as the manufacturer specifies; long or blocked ducts slow drying and raise temperatures.
  • HSE says work on gas fittings in workplaces such as shops, restaurants, schools and hospitals must be carried out by a Gas Safe registered engineer who is qualified for it.
  • Lint builds up in filters and ducts. Clean it as the manufacturer says, and include dryers in your fire risk assessment, which the Fire Safety Order requires the responsible person to make.
  • A faster washer spin leaves less water in the laundry, which shortens drying: compare washers and dryers as a pair.

Which type of commercial tumble dryer is best?

Short answer

Electric dryers are simplest to install if you have the electrical capacity; gas dryers need a gas supply and flue but suit sites with gas; heat pump dryers recirculate warm air and suit sites where venting is hard. The best choice depends on the supply you have, venting, how much you dry and your running costs.

General guide; suppliers will confirm what suits your site
TypeHow it heatsInstallation needsAsk about
Electric (vented)Electric elements heat incoming air; moist air is vented outsideA large electrical supply (often three-phase) and ducting to outsideSupply needed, cycle times, running cost for your loads
Gas (vented)A gas burner heats the air; exhaust is vented outsideGas supply, flue/vent and air supply to the room, installed by a Gas Safe registered engineer or competent person (HSE)Gas rate, ventilation, servicing of the burner
Heat pumpA heat pump heats and dries recirculated airUsually no outside vent, but a drain for condensed waterCycle times, room temperature, filter cleaning
Ask each supplier for the cycle time, energy or gas use and residual moisture assumptions behind their figures, for your typical load. Like-for-like numbers matter more than the type.

How big should commercial tumble dryers be?

Short answer

Big enough to dry everything your washers produce in the same working day. Because a dry cycle is often longer than a wash cycle, that usually means more dryer capacity than washer capacity, either bigger dryers or more of them.

Our laundry capacity calculator sizes washers and dryers separately, using the cycle times you enter.

What rules apply to gas tumble dryers?

Short answer

Gas dryers must be installed and worked on by someone competent, which HSE says in workplaces such as shops, restaurants, schools and hospitals means a Gas Safe registered engineer qualified to do the work, and employers must keep gas appliances, pipework and flues at their workplace in a safe condition.

How should a commercial tumble dryer be vented?

Short answer

Through ducting to outside, at the size, length and number of bends the manufacturer allows, with a suitable outlet. Ducts that are too long, too narrow or blocked with lint slow drying and can make the dryer run hot.

Good venting

  • Duct size and run as the manufacturer specifies
  • Smooth, cleanable ducting with as few bends as possible
  • An outlet that doesn't let lint build up
  • Enough fresh air into the room

Warning signs

  • Drying taking longer than it used to
  • Hot room or hot dryer cabinet
  • Lint around the outlet or doors
  • Several dryers sharing a duct not designed for it
Ready to compare quotes?Tell us about your laundry once and a specialist UK commercial laundry supplier will come back with options to buy, lease or rent.
Get quotes

How do you reduce the fire risk from commercial dryers?

Short answer

Clean lint filters as often as the manufacturer says (often every load or every shift), keep ducts clean, don't leave dryers running unattended if the manufacturer advises against it, and let loads cool down before stacking them. Include the laundry in your fire risk assessment.

This is general guidance. Follow the dryer manufacturer's instructions and your fire risk assessment for your site.

What servicing do commercial tumble dryers need?

Short answer

Regular cleaning by your staff (filters), and planned servicing by an engineer: drum, belts and bearings, door seals, heating, sensors, lint removal and, for gas dryers, the burner and flue.

Employers must keep work equipment "maintained in an efficient state, in efficient working order and in good repair" (PUWER regulation 5), and gas appliances in a safe condition (regulation 35 above). In care homes, HTM 01-04 says items should go through a drying process where they are compatible with it, then be stored in a clean area above floor level (Social care volume, 6.12), so a dryer breakdown matters there too. Ask suppliers what a service visit includes and how quickly they respond to breakdowns. See our repair and servicing guide.

What affects the price of a commercial tumble dryer?

Short answer

Capacity, heating type, controls (such as moisture sensing and programmable temperatures), the installation work (electrics, gas, ducting) and how you pay. Running costs depend heavily on how wet laundry arrives from the washer.

Get quotes for commercial laundry equipment

Tell us about your laundry once. We pass it to a specialist UK commercial laundry equipment supplier, who will:

  • Talk through your laundry: what you wash, how much, the space you have, and your water, drainage, power and any gas.
  • Quote in writing to buy, lease or on a monthly plan, with delivery, installation and servicing shown.
  • Explain the service cover: response times, what's included, and who to call when a machine stops.

For businesses and organisations. Prefer email? Write to hello@commerciallaundryhub.co.uk with your business type, size and the machines you need.

Free quotes

Tell us about your laundry

Three quick steps. Free and no obligation.

Your laundry
Options
Your details

ICO registered ZA810991 No obligation For businesses

Commercial tumble dryers: frequently asked questions

Is a gas or electric commercial tumble dryer better?

It depends on your site. Electric dryers are simpler to install where there's enough electrical capacity; gas dryers need a gas supply, a flue and a Gas Safe registered engineer or competent person (HSE). Compare running costs for your loads using each supplier's figures.

Do commercial tumble dryers need to be vented?

Vented electric and gas dryers need ducting to outside, installed as the manufacturer specifies. Heat pump dryers usually recirculate air and need a drain for condensed water instead of an outside vent.

Who can install a commercial gas tumble dryer?

HSE says work on gas fittings in workplaces such as shops, restaurants, schools and hospitals must be done by a Gas Safe registered engineer who is qualified for that work.

Why does my commercial dryer take longer than it used to?

Common causes include a blocked lint filter or duct, laundry coming out of the washer wetter than before, overloading, or a fault with heating or sensors. Clean the filter and call an engineer if it doesn't improve.

How often should I clean the lint filter?

As often as the manufacturer says, which is often every load or every shift. Have ducts and the area behind the drum cleaned at service visits.

Should my dryers be bigger than my washers?

Often, yes, because drying usually takes longer than washing. Size dryers on their own cycle time so they can dry everything your washers produce in the working day.

Can I put a commercial dryer on top of a washer?

Some commercial machines are made as stacked washer-dryers or stacked double dryers. Only stack machines designed and approved to be stacked.

Sources

We checked the facts on this page against these sources on 18 November 2026. Guidance changes: check the current version before you rely on it.

  1. Gas Safety (Installation and Use) Regulations 1998, regulation 3: qualification and supervision (legislation.gov.uk)
  2. Gas safety for employers (HSE)
  3. Gas Safety (Installation and Use) Regulations 1998, regulation 35: duties of employers (legislation.gov.uk)
  4. Regulatory Reform (Fire Safety) Order 2005, article 9: risk assessment (legislation.gov.uk)
  5. Provision and Use of Work Equipment Regulations 1998, regulation 5: maintenance (legislation.gov.uk)
  6. HTM 01-04: Social care volume (NHS England, PDF)