How much laundry, and how many machines?
Every figure is yours to change. Boxes marked example start with an example, not a benchmark: weigh a typical day's laundry and put in your own. Nothing is sent anywhere unless you add the result to a quote request.
1Your laundry
Weigh one typical day's dirty laundry (dry weight) and divide by the beds, rooms or covers that made it.
Weigh what goes into the machines over a normal week, or ask your current laundry contractor.
2Your laundry room
Cycle times include loading and unloading. Use the times for the programmes you'll actually run.
3The machines
560 kg a week ÷ 7 days = 80 kg; + 20% = 96 kg. Each 12 kg washer at 80% takes 9.6 kg × 8 cycles = 76.8 kg a day.
What this means
You'd need 2 washers and 2 dryers of 12 kg to wash and dry 96 kg a day in an 8-hour day. A supplier will check this against what you wash, your space, water, drainage and power.
Link to these figures: https://commerciallaundryhub.co.uk/laundry-capacity-calculator?mode=units&unit=beds&units=40&…
- For example, a 40-bed care home that weighs its laundry at 2 kg per bed per day has 560 kg a week to wash, or 80 kg a day; with 20% headroom that is 96 kg a day, which needs 2 washers and 2 dryers of 12 kg loaded to 80% on 60-minute cycles over an 8-hour day.
- Laundry a week = units × kg per unit per day × occupancy × days it's produced. Divide by the days the laundry runs, then add headroom for busy days.
- Machines needed = kg a day ÷ (machine size in kg × load % × cycles a day), rounded up. Cycles a day = laundry hours × 60 ÷ cycle minutes, rounded down.
- There's no reliable single 'kg per bed' figure, so the calculator doesn't pretend to have one: weigh a typical day's laundry and enter your own figure.
- Size dryers on their own cycle time, not the washer's: if drying takes longer than washing, you need more dryer capacity to keep up.
- A standby machine of each type keeps the laundry going during a breakdown, which matters most where linen can't wait, such as care homes.
- Shareable links: ?mode=units|kg&unit=&units=&kgu=&occ=&gen=&kgw=&run=&hours=&wm=&dm=&head=&wk=&dk=&load=&standby=1 set the inputs and show the result on load.
Washers and dryers needed at a glance
Starting from kg of laundry a week, this table shows the washers and dryers needed at three machine sizes, for a laundry running 7 days a week, 8 hours a day, on 60-minute wash and dry cycles, loaded to 80%, with 20% headroom. Change any of these in the calculator: the answer moves with them.
| Laundry a week | A day (7 days) | With 20% headroom | 10 kg machines | 16 kg machines | 25 kg machines |
|---|---|---|---|---|---|
| 150 kg | 21.4 kg | 25.7 kg | 1 + 1 | 1 + 1 | 1 + 1 |
| 300 kg | 42.9 kg | 51.5 kg | 1 + 1 | 1 + 1 | 1 + 1 |
| 500 kg | 71.4 kg | 85.7 kg | 2 + 2 | 1 + 1 | 1 + 1 |
| 750 kg | 107.1 kg | 128.5 kg | 3 + 3 | 2 + 2 | 1 + 1 |
| 1,000 kg | 142.9 kg | 171.5 kg | 3 + 3 | 2 + 2 | 2 + 2 |
| 1,500 kg | 214.3 kg | 257.2 kg | 5 + 5 | 3 + 3 | 2 + 2 |
| 2,500 kg | 357.1 kg | 428.5 kg | 7 + 7 | 5 + 5 | 3 + 3 |
How is laundry capacity calculated?
Work out how many kilos of laundry you produce a day, add headroom, then divide by what one machine can process in a day: its size in kg, times how full you load it, times the number of cycles it can run in your laundry hours. Round up. Do the same for dryers with the dryer's size and cycle time.
- Laundry a weekUnits × kg per unit per day × occupancy % × days produced (or enter kg a week).
- A dayLaundry a week ÷ days the laundry runs, rounded to 0.1 kg.
- Headroom× (1 + headroom %), for busy days and peaks.
- CyclesHours a day × 60 ÷ cycle minutes, rounded down, separately for washers and dryers.
- Machineskg a day ÷ (size × load % × cycles), rounded up. Add one of each if you want a standby.
Washer loads a day is kg a day ÷ (washer size × load %), rounded up. 'Washer time used' shows how busy the washers would be: the closer to 100%, the less slack you have for a long programme, a re-wash or a machine being serviced.
What inputs, assumptions and limits does it use?
All inputs are yours: what you count by, how many, kg per unit per day, occupancy, days produced, days and hours the laundry runs, cycle times, headroom, machine sizes and load. It assumes every load is the same weight and every cycle the same length, and it doesn't check space, water, drainage or power.
- InputsCount by (beds, rooms, covers, members, horses or other), how many, kg per unit per day, occupancy %, days produced; or kg a week. Days and hours the laundry runs, wash and dry cycle minutes, headroom %, washer and dryer size in kg, load % and standby.
- Example figuresBoxes marked 'example' start with figures to show how the sums work. They aren't industry averages. Replace them with your own.
- AssumesLaundry spread evenly across the days the laundry runs; the same weight in every load and the same cycle time; machines start a new cycle straight away.
- Doesn't includeDifferent programmes for different items (for example a longer disinfection or sluice cycle), ironing and folding time, staff breaks, or items that can't be tumble dried.
- Don't overloadMachine sizes are the maximum dry-weight load. For care homes, NHS England's HTM 01-04 says washing machines should not be overloaded (Social care volume, 6.9).
- No pricesThe calculator doesn't estimate cost. Quotes come from the supplier for your situation.
How do I find out how much laundry we produce?
Weigh it. Bag up one typical day's dirty laundry, weigh the bags on a bathroom or parcel scale, take off the weight of the bags, and divide by the number of beds, rooms or covers in use that day. Repeat on a busy day.
- Weigh dry, before washingMachine capacities are quoted as dry weight, so weigh dirty laundry before it goes in, not wet laundry coming out.
- Pick a typical day, then a busy oneUse the typical day for kg per unit and the busy day to set your headroom.
- Count what was in useDivide by occupied beds or rooms, or covers served, that day, then use the occupancy box for the average.
- Ask your current contractorIf you send laundry out now, your invoices or delivery notes may show the weight or item counts.
How do I use the result when getting quotes?
Give suppliers your kg a week, the days and hours your laundry runs and what you wash. Use the machine count as a starting point: a supplier will check it against their machines' real cycle times, your space and your services.
The button under the result adds your figures to the quote form for you. Suppliers will usually also want to know what you wash (bed linen, towels, kitchen cloths, uniforms, horse rugs), whether anything needs a hot disinfection or sluice programme, the room's size and access, and the water, drainage, electricity and any gas available.
Get quotes for commercial laundry equipment
Tell us about your laundry once. We pass it to a specialist UK commercial laundry equipment supplier, who will:
- Talk through your laundry: what you wash, how much, the space you have, and your water, drainage, power and any gas.
- Quote in writing to buy, lease or on a monthly plan, with delivery, installation and servicing shown.
- Explain the service cover: response times, what's included, and who to call when a machine stops.
For businesses and organisations. Prefer email? Write to hello@commerciallaundryhub.co.uk with your business type, size and the machines you need.
Related guides
Laundry capacity calculator: frequently asked questions
How do I work out what size commercial washing machine I need?
Work out your laundry in kg a day, then divide by the number of cycles a machine can run in your laundry hours and by how full you'll load it. For example, 96 kg a day over 8 one-hour cycles is 12 kg a cycle; loading to 80% of rated size, that's 15 kg of rated capacity, so one 16 kg machine or two 12 kg machines.
How many kg of laundry does a bed produce a day?
It varies too much to give one figure: it depends on how often beds are changed, towels, clothing, continence needs and what you send out. Weigh a typical day's laundry and divide by the beds in use; the calculator uses your figure.
Should dryers be the same size as washers?
Not necessarily. Size dryers on their own cycle time and load. If your dryers take longer than your washers, you need more dryer capacity to keep up, which the calculator works out separately.
What load percentage should I use?
Machine sizes are the maximum dry-weight load, and overloading reduces washing performance. Many people use less than 100% to allow for bulky items. Ask the supplier what their machines are rated for and how they recommend loading them.
Why add a standby machine?
If you only have the number of machines you need, a breakdown or service visit stops part of your laundry. One standby washer and dryer keeps you going, which matters most where clean linen can't wait.
Does the calculator include ironing?
No. It sizes washers and dryers only. If you iron sheets or table linen on site, ask suppliers about finishing equipment as well.
Can I share my calculation?
Yes. The link under the calculator includes all your inputs as URL parameters, so anyone opening it sees the same result.
Does the calculator store my data?
No. It runs in your browser. Nothing is sent unless you add the result to a quote request and send the form.
Sources
We checked the facts on this page against these sources on 18 November 2026. Guidance changes: check the current version before you rely on it.