Free tool · your own figures

Laundry capacity calculator: kg a day and machines needed

This laundry capacity calculator turns your beds, rooms, covers or horses into kilos of laundry a day, then works out how many commercial washing machines and tumble dryers of a given size you need to keep up. For example, a 40-bed care home that weighs its laundry at 2 kg per bed per day has 560 kg a week to wash, or 80 kg a day; with 20% headroom that is 96 kg a day, which needs 2 washers and 2 dryers of 12 kg loaded to 80% on 60-minute cycles over an 8-hour day.

  • Start from beds, rooms or covers, or from kg a week
  • Washers and dryers needed, with an optional standby
  • Send the result straight into a quote request
  • ICO registered ZA810991
  • UK company 11135452
  • Rules checked 18 November 2026
Free quotes

Get quotes for the machines you need

Free, no obligation. Three quick steps.

Your laundry
Options
Your details

ICO registered ZA810991 No obligation For businesses

Free calculator · your own figures

How much laundry, and how many machines?

Every figure is yours to change. Boxes marked example start with an example, not a benchmark: weigh a typical day's laundry and put in your own. Nothing is sent anywhere unless you add the result to a quote request.

1Your laundry

Weigh one typical day's dirty laundry (dry weight) and divide by the beds, rooms or covers that made it.

2Your laundry room

Cycle times include loading and unloading. Use the times for the programmes you'll actually run.

3The machines

2 + 2 washers + dryers
560 kglaundry a week
80 kga day it runs
96 kga day with headroom
10washer loads a day
8 / 8wash / dry cycles per machine
62.5%washer time used

560 kg a week ÷ 7 days = 80 kg; + 20% = 96 kg. Each 12 kg washer at 80% takes 9.6 kg × 8 cycles = 76.8 kg a day.

What this means

You'd need 2 washers and 2 dryers of 12 kg to wash and dry 96 kg a day in an 8-hour day. A supplier will check this against what you wash, your space, water, drainage and power.

Laundry capacity calculator: key points
  • For example, a 40-bed care home that weighs its laundry at 2 kg per bed per day has 560 kg a week to wash, or 80 kg a day; with 20% headroom that is 96 kg a day, which needs 2 washers and 2 dryers of 12 kg loaded to 80% on 60-minute cycles over an 8-hour day.
  • Laundry a week = units × kg per unit per day × occupancy × days it's produced. Divide by the days the laundry runs, then add headroom for busy days.
  • Machines needed = kg a day ÷ (machine size in kg × load % × cycles a day), rounded up. Cycles a day = laundry hours × 60 ÷ cycle minutes, rounded down.
  • There's no reliable single 'kg per bed' figure, so the calculator doesn't pretend to have one: weigh a typical day's laundry and enter your own figure.
  • Size dryers on their own cycle time, not the washer's: if drying takes longer than washing, you need more dryer capacity to keep up.
  • A standby machine of each type keeps the laundry going during a breakdown, which matters most where linen can't wait, such as care homes.
  • Shareable links: ?mode=units|kg&unit=&units=&kgu=&occ=&gen=&kgw=&run=&hours=&wm=&dm=&head=&wk=&dk=&load=&standby=1 set the inputs and show the result on load.

Washers and dryers needed at a glance

Short answer

Starting from kg of laundry a week, this table shows the washers and dryers needed at three machine sizes, for a laundry running 7 days a week, 8 hours a day, on 60-minute wash and dry cycles, loaded to 80%, with 20% headroom. Change any of these in the calculator: the answer moves with them.

Washers + dryers needed. Generated by the calculator's own code on 18 November 2026 from these example settings: 7 days, 8 hours, 60-minute wash and dry cycles, 80% load, 20% headroom, no standby. Not a benchmark: your cycle times and loads will differ.
Laundry a weekA day (7 days)With 20% headroom10 kg machines16 kg machines25 kg machines
150 kg21.4 kg25.7 kg1 + 11 + 11 + 1
300 kg42.9 kg51.5 kg1 + 11 + 11 + 1
500 kg71.4 kg85.7 kg2 + 21 + 11 + 1
750 kg107.1 kg128.5 kg3 + 32 + 21 + 1
1,000 kg142.9 kg171.5 kg3 + 32 + 22 + 2
1,500 kg214.3 kg257.2 kg5 + 53 + 32 + 2
2,500 kg357.1 kg428.5 kg7 + 75 + 53 + 3

How is laundry capacity calculated?

Short answer

Work out how many kilos of laundry you produce a day, add headroom, then divide by what one machine can process in a day: its size in kg, times how full you load it, times the number of cycles it can run in your laundry hours. Round up. Do the same for dryers with the dryer's size and cycle time.

  1. Laundry a weekUnits × kg per unit per day × occupancy % × days produced (or enter kg a week).
  2. A dayLaundry a week ÷ days the laundry runs, rounded to 0.1 kg.
  3. Headroom× (1 + headroom %), for busy days and peaks.
  4. CyclesHours a day × 60 ÷ cycle minutes, rounded down, separately for washers and dryers.
  5. Machineskg a day ÷ (size × load % × cycles), rounded up. Add one of each if you want a standby.

Washer loads a day is kg a day ÷ (washer size × load %), rounded up. 'Washer time used' shows how busy the washers would be: the closer to 100%, the less slack you have for a long programme, a re-wash or a machine being serviced.

What inputs, assumptions and limits does it use?

Short answer

All inputs are yours: what you count by, how many, kg per unit per day, occupancy, days produced, days and hours the laundry runs, cycle times, headroom, machine sizes and load. It assumes every load is the same weight and every cycle the same length, and it doesn't check space, water, drainage or power.

Got your numbers?Send them with your enquiry and a specialist UK commercial laundry supplier will check the sizing and quote.
Get quotes

How do I find out how much laundry we produce?

Short answer

Weigh it. Bag up one typical day's dirty laundry, weigh the bags on a bathroom or parcel scale, take off the weight of the bags, and divide by the number of beds, rooms or covers in use that day. Repeat on a busy day.

If you can't weigh it yet, run the calculator with a low and a high guess. If both give the same number of machines, the sizing is robust; if not, it's worth weighing before you buy.

How do I use the result when getting quotes?

Short answer

Give suppliers your kg a week, the days and hours your laundry runs and what you wash. Use the machine count as a starting point: a supplier will check it against their machines' real cycle times, your space and your services.

The button under the result adds your figures to the quote form for you. Suppliers will usually also want to know what you wash (bed linen, towels, kitchen cloths, uniforms, horse rugs), whether anything needs a hot disinfection or sluice programme, the room's size and access, and the water, drainage, electricity and any gas available.

Get quotes for commercial laundry equipment

Tell us about your laundry once. We pass it to a specialist UK commercial laundry equipment supplier, who will:

  • Talk through your laundry: what you wash, how much, the space you have, and your water, drainage, power and any gas.
  • Quote in writing to buy, lease or on a monthly plan, with delivery, installation and servicing shown.
  • Explain the service cover: response times, what's included, and who to call when a machine stops.

For businesses and organisations. Prefer email? Write to hello@commerciallaundryhub.co.uk with your business type, size and the machines you need.

Free quotes

Tell us about your laundry

Three quick steps. Free and no obligation.

Your laundry
Options
Your details

ICO registered ZA810991 No obligation For businesses

Laundry capacity calculator: frequently asked questions

How do I work out what size commercial washing machine I need?

Work out your laundry in kg a day, then divide by the number of cycles a machine can run in your laundry hours and by how full you'll load it. For example, 96 kg a day over 8 one-hour cycles is 12 kg a cycle; loading to 80% of rated size, that's 15 kg of rated capacity, so one 16 kg machine or two 12 kg machines.

How many kg of laundry does a bed produce a day?

It varies too much to give one figure: it depends on how often beds are changed, towels, clothing, continence needs and what you send out. Weigh a typical day's laundry and divide by the beds in use; the calculator uses your figure.

Should dryers be the same size as washers?

Not necessarily. Size dryers on their own cycle time and load. If your dryers take longer than your washers, you need more dryer capacity to keep up, which the calculator works out separately.

What load percentage should I use?

Machine sizes are the maximum dry-weight load, and overloading reduces washing performance. Many people use less than 100% to allow for bulky items. Ask the supplier what their machines are rated for and how they recommend loading them.

Why add a standby machine?

If you only have the number of machines you need, a breakdown or service visit stops part of your laundry. One standby washer and dryer keeps you going, which matters most where clean linen can't wait.

Does the calculator include ironing?

No. It sizes washers and dryers only. If you iron sheets or table linen on site, ask suppliers about finishing equipment as well.

Can I share my calculation?

Yes. The link under the calculator includes all your inputs as URL parameters, so anyone opening it sees the same result.

Does the calculator store my data?

No. It runs in your browser. Nothing is sent unless you add the result to a quote request and send the form.

Sources

We checked the facts on this page against these sources on 18 November 2026. Guidance changes: check the current version before you rely on it.

  1. HTM 01-04: Social care volume (NHS England, PDF)